DIY之路(1)--全自制顯示支撐臂

sammmmm

By sammmdiyer at 2011-05-12
"the way it's meant to be diy"....这才是diy的玩方法


By sammmDIYer at 2011-05-12
software design


By sammmdiyer at 2011-05-12
cutting


By sammmdiyer at 2011-05-12
Fully Stainless Steel part


By sammmDIYer at 2011-05-12
bend and weld


By sammmdiyer at 2011-05-12
assembly


By sammmdiyer at 2011-05-12
modify base support


By sammmdiyer at 2011-05-12
dang dang dang dang....


By sammmdiyer at 2011-05-12
test fitting and other


By sammmDIYer at 2011-05-12
poor look


By sammmdiyer at 2011-05-12
heavy support


By sammmdiyer at 2011-05-14
thank.

oo0t0oo

wa....全部自制, 利害.

jwong852

勁 !

不鏽鋼都cut得咁靚, 用laser cut 定係CNC.
成分厚不鏽鋼片, 用乜野機屈 ? 油壓接床 ? Magnetic bending ?
http://www.workshoppress.com/magnetic_bending_machines.html

焊得咁靚, 用電焊定氣焊 ?

"咩"3部mon, 建議個clamp做大D(size x2), 用2個clamp夾張枱, 驚張枱板只夾一點唔夠力.

希望將來可以同樓主合作攪大project, 我設計+製作電子部份, 樓主做金工部份.

haro2003

勁~大開眼界!

hanglch

樓主太強了, 一般人都學不來...

jackyt

超勁! 唔可以講只係DIY, 應該係PRODIY.

jackyt

加個logo及比個品牌就可以大量生產買出街.

evo88

好靚，但張台好似唔多配

longun

Mission impossible! 好正呀...