GL.iNET MT3000 (Beryl AX )

本帖最後由 luke123 於 2024-8-2 11:49 編輯

Hi

Thinking of buying GL.iNET 大陸版 MT3000 (Beryl AX ).

This post points out the mainland model's firmware restrictions.
https://www.hkepc.com/forum/redi ... 97&pid=41918083

Has any CHing bought 大陸版 MT3000?

If so, do you

1   flash the latest OpenWrt (eg using a sysupgrade image https://openwrt.org/toh/gl.inet/gl-mt3000)
or
2   改區 CN to US to regain VPN use, without flashing OpenWrt?

Is the original GL.iNET GUI better for travel router purposes, and that OpenWrt is not suitable?

Thanks in advance!

1. 如果自己update  openwrt ,就會冇咗官方介面 , 即是 一開機入到去就係openwrt
(跟官方介面的openwrt 是21.02, 但很穩定, 我個人覺得,在外面用要穩定啲好 加上我又是新手) , 但係要如安返官方介面, 是非常之容易的, 所以不要擔心返唔到轉頭.
2. 改區不用flash
有時間可睇下面哪位人只的片段 有好多段片都教這款牌子的機
https://www.youtube.com/@wukongdaily/videos

TOP

1. 如果自己update  openwrt ,就會冇咗官方介面 , 即是 一開機入到去就係openwrt
(跟官方介面的openwrt 是2 ...
kcboy 發表於 2024-8-3 09:36


Very useful and helpful. Many thanks!

TOP

改區有機會 hard brick 隻 router,風險自行承擔,唔肯定的話俾 d 錢買國際版

我自己就一定用 official OpenWrt,official 已經係 v23.05.4,似乎過多幾個月就應該有 24.x,但 GL 仲用緊 21.x based....

TOP

update咗最新firmware, 轉咗us區,安裝埋iStore,使用中,未發覺有問題

TOP

回復 4 #fakeman

可能因為 mtk driver兼容原因。immortalwrt-mt798x都係21.x....

TOP

回復 fakeman

可能因為 mtk driver兼容原因。immortalwrt-mt798x都係21.x....
semson 發表於 2024-8-4 19:39



    大版本升級要成個重做咁濟,有排搞啦,佢哋邊有咁多人力去做,我懷疑 iStore 都唔係最新。所以我不嬲都話用 official 最好,而家官方經過討論已經將原定 24.x 由 kernel 6.1 LTS 直上 6.6 LTS,雖然會預計 delay release 幾個月,但係 kernel version 追近咗新嘅 LTS,變相新 hardware support 會快 D(因為而家好多新 driver 講緊 kernel 6.7+ 開始先有,backport 返 6.6 都算合理因為都未有下個 LTS version,但 backport 6.1 會做多好多嘢),例如 RK3588,已經有人開始諗點整合去 6.6 然後期望係 v24 做到 NanoPi R6S/R6C support,Immortal 果 D 肯定做唔到(佢可以食返 FriendlyElec prototype 果個 v21.x based driver 但必定 bug 到暈)

TOP

Very useful and helpful. Many thanks!
luke123 發表於 2024-8-3 14:06



    我去 GLinet 網,下載 MT3000國際ROM,  裝完 就是 v4.6.2 無咗 CN , VPN 都見到 ....

舊年剛買時,就用 SSH改地區 ... 上星期就刷國際ROM...

TOP

回覆 7# fakeman


希望係6.6! 我有個RTL8811cu device 要有6.2+ 先有in-kernel support :)

TOP

本帖最後由 fakeman 於 2024-8-6 09:29 編輯
回覆  fakeman


希望係6.6! 我有個RTL8811cu device 要有6.2+ 先有in-kernel support :)
semson 發表於 2024-8-5 20:16


OpenWrt 官方已經確定會跳過 6.1 LTS,直上 6.6 LTS,你如果 download snapshot 會見到好多比較新嘅 target 或大平台已經用緊 kernel 6.6(例如 mt76,x86, ipq 40xx/806x/807x,詳細呢度)

  P.S.  ching 如果有時間幫手試,可否睇下呢度??呢個 GitHub 嘅作者係 gather 大量 USB WiFi information(所以你會好容易知道 Linux 下邊 D 好邊 D 冇咁好),佢亦同其他 devs 合作去改善部分 Realtek USB WiFi driver,呢期佢搵緊用家幫手試新 driver,我都拎咗手頭幾個唔同嘅 Realtek USB WiFi 幫佢試吓

TOP