S 記hyper backup 問題- destination corrupted
本帖最後由 wongja 於 2022-4-11 18:08 編輯
DS918+
由 DSM6.0 開始用
本身4 bay ﹐bay 1-2 係 SHR , bay 3 , 4 係 basic
bay 1-2 擺 document , 相等等﹐約 2.7TB (10TB SHR - 8.7TB available storage)
bay 3 係舊 HDD 做 hyper backup 成個 SHR + application config (4TB)
bay 4 係BT Drive 連 BT temp file directory (2TB)
由 2019 年7 月起用﹐其實成件事好 perfect, hyper backup 重來無問題
個 HDD allocation 亦夠晒我用。
但升左 DSM7 後﹐就開始有 Corrupted destination, 之後個task 就會 backup 唔到
唯一解決方法就係 del 左 task, del 左個 hbk , 再 重新 backup 過
咁最近我見越嚟越密﹐就開始懷疑係咪隻HDD 問題 (因為佢話 destination corrupted)
咁我理解佢應該係backup destination 出事喇
於是我走去買左隻USB HDD (WD 4T) 再去做過
開頭都無事﹐係稍為慢少少。
點知到尋晚﹐又有alert 話 destional corrupted.
個log 如下。
Backup task was unable to run due to errors found at the backup destination.
The following shared folders or files were found broken in the latest integrity check and cannot be restored.
There may be other broken files which were not detected this time.
If you have further questions, please contact Synology support.
Broken shared folder(s):
Version: 2022-04-05 15:16:57+0800, shared folder: homes
而家我又剷左個 task & hbk 又 backup 過
但因為 EXT. HDD 真係太慢﹐2.7T 野要 over 1 日去做
所以要開始真係搵個解決方法。 而我諗到幾個問題喺 #2. |
|
|