How to connect between two subnet

watson852

Any ching to have some suggestion?
I'm in a home where 192.168.2.1 Network with a Router and Switch with 5 devices. On the Same Floor, there is another room, with 192.168.1.1 Network with a Router and switch with 8 devices. Then also using different Internet.

The question is how can I connect this two network & share printer, copy files between two network?

Please help. I can pull the Network cable from here to there.
Many thanks!

tim1014

靜態路由表幫到你

watson852

回覆 2# tim1014

Can I to it more simply? i.e. connect one switch between 2 subnet?

LEARZA

要簡單
入ROUTER 改 subnet
否則。。。相信私自改動不乎網絡設計者原意

kennyyyt

1. Static route for pc
2. Static route in Router
3. link up 2 switch and set subnet mask 255.255.0.0 in PC that will use printer

ken1003

如果2邊router冇做DHCP, 就咁駁住2邊sw, 其中一邊機加多個對面subnet 既secondary ip

indorsement

buy one cheap wireless router, one network connect to wan, another network connect to lan.

ckshum

To connect 1 WAN and 2 LAN, you need a 3-port router.  If you have a normal home router, depending on the switch hardware, flashing it to firmware like openwrt will allow you to assign one of the LAN ports to a second LAN.  Nevertheless, it will require a lot of configuration for file and printer sharing to work over two subnets.

The simple solution is to put everything under the same subnet.