NETGEAR WRN614 設定REPEARTER一問

xelein

有一個無PASSWORD的WIFI，我想放大訊號。但係唔識SET。
做唔做得到。

https://www.netgear.com/support/product/WNR614#docs


Select ADVANCED > Advanced Setup > Wireless Repeating Function.
The Wireless Repeating Function screen displays. The wireless MAC address of the router displays onscreen.
5. Select the Enable Wireless Repeating Function check box.
6. Select the Wireless Repeater radio button.
7. Complete the Repeater IP Address field.

This IP address must be in the same subnet as the base station, but different from the LAN IP address of the base station.
8. To prevent wireless clients from associating with the repeater and allow LAN client associations only, select the Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be able to associate with the repeater.
9. In the Base Station MAC Address field, enter the MAC addresses for the access point that will function as the base station.
10. Click the Apply button.
Your changes are saved.
11. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the base station or a repeater can connect to the Internet. Any computer that is connected to the base station can share files and printers with any other wireless or wired computer or server that is connected to a repeater.



7. Complete the Repeater IP Address field.
係咪打192.168.1.1
同埋要放大的ROUTER的MAC ADDRESS就OK。

乜都唔係好識。有無人救教。

蠢貓

假設你主router個ip係192.168.1.1嘅話，repeater個度咪set做192.168.1.30（其他都數字都得，除咗1之外）

via HKEPC Reader for Android