[操作疑難] 想請教點SET兩隻ROUTER共用加VPN

skt

事源小弟公司本身係用100MB但無ROUTER提供的,

咁小弟就帶左隻WR740N刷左DD-WRT 兼SETUP左基本PPTP VPN FOR返大陸比手機翻牆用,

點知前排公司個電訊商免費UP左上500MB光纖加借埋個R6400 ROUTER,

咁個問題就係個R6400我地係無方法入去SETUP任何野,所以個VPN而家用唔到,

而家就係想請教下點樣可以解決隻R6400做MAIN比隻WR740N連兼用到個VPN功能? THANKS

觀星是答案

事源小弟公司本身係用100MB但無ROUTER提供的,

咁小弟就帶左隻WR740N刷左DD-WRT 兼SETUP左基本PPTP VPN FOR ...
skt 發表於 2018-9-17 14:16

問返你間 ISP

skt

回覆 2# 觀星是答案


    當初黎upgrade果時已經問過個師傅, 佢話唔會提供個router id同pw比我地

觀星是答案

回覆  觀星是答案


    當初黎upgrade果時已經問過個師傅, 佢話唔會提供個router id同pw比我地 ...
skt 發表於 2018-9-17 15:05

應該問可唔可以唔用佢隻 router , 或者可唔可以將隻 router set 成 bridge mode

kofz

回覆  觀星是答案


    當初黎upgrade果時已經問過個師傅, 佢話唔會提供個router id同pw比我地 ...
skt 發表於 2018-9-17 15:05

    R6400之後駁隻WR740N開 vpn唔得？

ununfoot

R6400之後駁隻WR740N開 vpn唔得？
kofz 發表於 2018-9-17 18:59

    佢冇router  password，冇辦法set port forward去自己個vpn server

via HKEPC IR Pro 3.4.0 - Android(2.3.4)

boyman

試下 admin / password
好多都懶SET
用番原廠

skt

回覆 7# boyman


    試過唔得

C-Leung

Reset咗隻6400咪得law

boyman

To perform a factory reset:

1. On the back of your router, locate the Restore Factory Settings or Reset button.
2. Using a paper clip or similar object, press and hold the Restore Factory Settings or Reset button for about seven seconds.
3. Release the Restore Factory Settings or Reset button and wait for your router to reboot.
After your router is finished with the factory reset, the Power light stops blinking and lights solid green.
Note: The Power light on newer router models lights solid white.
The factory default settings are restored