hkfriends

cannot get DNS :(  
anyone know how to setup with pccw? (pppoE)

sochung

報名跟各位師兄學嘢

hkfriends

#| ether1 is renamed to ether1-gateway
#| DHCP client and masquerade is set on ether1-gateway
#| ether2 is renamed to ether2-master-local and configured as switch master port for ether3-ether5
#| IP address 192.168.88.1/24 and DHCP server is set on ether2-master interface
#| DHCP servers address pool is 192.168.88.10-192.168.88.254



Based on the default config,

Port 1 ==> connect to PCCW ADSL modem
Port 2 ==> plug to my computer (computer is set to DHCP)


1) my computer will assigned to IP 192.168.88.254
2) can connect winbox
3) add ppp (pppoe client) "named pccw" ==> connected to internet
4) open terminal, and cannot ping any domain name, unresloved DNS

But I still cannot using internet from my PC

sk2k

回復 13# hkfriends


    ip / dns / settings .. 自己入 dns .. (eg. 8.8.8.8)
或者 ..  pppoe / dial out / Use Peer DNS

ipohk

回復 13# hkfriends
/ip firewall filter add chain=input src-address=192.168.88.0/24 action=accept comment="From our LAN"

kanlo

回復 10# sk2k

但係我發覺已經default咗有以下設定:

IP----Firewall-----Nat
on tab General:Chain: src-nat
Out Interface: ether1
On tab Action: Action: masquerade

唔知呢個setting有無用呢?

fakeman

回復  sk2k

但係我發覺已經default咗有以下設定:

IP----Firewall-----Nat
on tab General:Chain: src-na ...
kanlo 發表於 2011-9-4 14:04

    無呢個的話連網都上唔到....

kimalto

連DHCP都拎唔到IP....

kimalto

都係搞唔到DUAL WAN..
HKBN個條線一拎到IP就會搞到LAN的PC不能上網..
只係用PCCW又沒問題, 試下倒轉先..
====================================

試左HKBN同PCCW(DHCP, not pppoe), 2條WAN一齊行會令到LAN PC disconnect,
PCCW / HKBN 插PORT 1, 冇問題,
PCCW 插PORT 1, HKBN 插PORT 2 (或2條線PORT位倒轉), 都會令到係Port 3 4 5的電腦拎唔到IP.

下星期先有時間再試了

係NAT , concurrent sessions數量上都好滿意
而且呢隻機身溫度唔熱

遲D睇多D師兄的分享先..
暫時遇到的問題係, LAN上的PC有某個SERVICE不能令LAN入面其他PC ACCESS, 無論用IP/DNS都不能..
解決方法似乎係呢個但未有時間睇..
http://wiki.mikrotik.com/wiki/Hairpin_NAT

man123

...........Set 了半天未能 online 和現在只有 blue led 着其它 lan 燈唔着......