redcarcar

deleted    .

redcarcar

R7000 可唔可以用stock firmware 直接upload openwrt 個file upgrade 成openwrt?

如果唔得咁邊隻得?

我想要隻$1000上下易安裝少鑊氣傳輸快既router

redcarcar

Archer C7 v2 有d巴打話難有d話易

好亂呀

BTW, google 過真係無咩教學, 資訊好亂

hkwtongme

Archer C7 v2 有d巴打話難有d話易

好亂呀

BTW, google 過真係無咩教學, 資訊好亂 ...
redcarcar 發表於 2017-5-27 15:38

    如果唔係用原廠firmware，幾時都係買大路嘢會好啲，一來有事都多啲人可以幫手，二來寫firmware嘅人都會多啲，冷門嘢有事如果唔可以搵原廠都多數係搵自己嚟搞，咁就要睇平得多唔多同自己夠唔夠料唔使搵人幫。

redcarcar

如果唔係用原廠firmware，幾時都係買大路嘢會好啲，一來有事都多啲人可以幫手，二來寫firmware嘅人 ...
hkwtongme 發表於 2017-5-27 17:01

    可唔可以建議幾部多人用穩陣而又裝到openwrt既?

hkwtongme

可唔可以建議幾部多人用穩陣而又裝到openwrt既?
redcarcar 發表於 2017-5-27 17:09

    你可以參考下面條link。
https://lede-project.org/toh/start

redcarcar

TP-Link Archer C7 V2 裝openwrt 似乎會有少少鑊氣
https://wiki.openwrt.org/toh/tp- ... p-link_archer_c7_v2


Installation of TP-Link Archer C7 V2

(Updated and tested on March 2017 by orenr)

TP-Link are checking for the file signature in order to verify it. Once trying to flash OpenWrt you will encounter the following error:

Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.
For TP-Link Archer C7 v2.1 it is enough just to rename the factory image to something like factory.bin, then just upload it like a firmware upgrade.

Use the following workaround (based on https://www.gargoyle-router.com/ ... .php?f=8&t=8210)

1.Download appropriate modified version of DDWRT that passes the TP-Link verification: http://www.dd-wrt.com/phpBB2/vie ... 84f914718a843aa2ea4

Please notice that there are three different versions - US version, General international and an Israeli version. Download the version suitable for your device. Flash the DD-WRT firmware. Please note that TP-Link defaults to 192.168.0.1, but DD-WRT defaults to 192.168.1.1, so make sure to reconnect the ethernet cable if your DHCP client cannot figure it out.

redcarcar

TP-Link TL-WR841ND 就好簡單

https://wiki.openwrt.org/toh/tp- ... p-link_archer_c7_v2

Installing via web interface:

Download image for your version.
Log in to router web interface and select the firmware image you just uploaded as an update.
Sit and wait while it flashes. It will reboot and be accessible at 192.168.1.1.

redcarcar

不要買 低b link C7 啊   
已中伏 比較難改成openwrt / lede
USB 又很慢
好處係 openconnect / sh ...
noyfb 發表於 2017-5-24 18:37

    r7000 , 官網無講點install Openwrt
https://wiki.openwrt.org/toh/netgear/r7000#installation

Crash9898

TP Link Archer C7 是国内乜相对广應 model ?  

Thanks for the input