非常好的 report.  

不過我想請教 - 測試 heatpipe 式 HS 是在水平放情況下.

而一般用戶使用, 是轉 90 度打橫用.會否對 Heatpipe 有影響 ?

TOP

咁大風,影響應該不大。

TOP

我離開左AC之後轉左去做的份工同水流及電鍍的公司打工~直到而家,我聽返來的係,鎳的鍍種本來已經幾貴,但06年又比人抄起左升左一倍咁LOR

原帖由 hktxs 於 2007-12-9 01:57 發表
tony~我只係唔明某d朋友點解會咁講.

鍍鎳響電鍍黎講唔係一種好貴o既工藝,(可以叫做賤添)我家陣做緊電............行業

TOP

如果O個條係GROOVE就會有好大影響~但好果係SINTER PIPE就冇咩影響咁滯~
至於點解,又要請"吳廣得"場了

原帖由 MKRCK 於 2007-12-9 09:18 發表
非常好的 report.  

不過我想請教 - 測試 heatpipe 式 HS 是在水平放情況下.

而一般用戶使用, 是轉 90 度打橫用.會否對 Heatpipe 有影響 ?

TOP

回復 30# 的帖子

bad3luck~做咩咁問呀?想做炒家?

TOP

回復 40# 的帖子

唔怪得佢咁豪啦~ 原來係你比佢我~thx~
支散熱膏唔錯~幾好塗及抹~我如果用完會p.m你的,放心

TOP

回復 33# 的帖子

我講緊嘅係趨勢!
短時間趺幅唔咪問題!It is a trend analysis.

TOP

原帖由 tonychoi 於 2007-12-9 10:46 發表
如果O個條係GROOVE就會有好大影響~但好果係SINTER PIPE就冇咩影響咁滯~
至於點解,又要請"吳廣得"場了


我係對 Nickel & heatsink 做分析啫。

我知。
C-Hing (Tony) 上次講過 heatpipe 有 3 種 ma。
咁我依家知道點解performance & 價錢相差咁遠 lur

TOP

整多10個8個呢d test 可以出書了~

TOP

回復 51# 的帖子

出書唔易~再講我係娛人自娛的性質攪o個個散熱diy blog的
呢段就係我攪個散熱diy blog的目的:
OCbrotherhood mission statement:

1. Open all the design secrets and elements of a Good Cooling Solution, the cooling world is not just exclusive for C,A & Z. All advance DIYers can really DIY by your actual requirement and situtation.
2. Break all wrong concepts in the computer cooling or form factor design by our solid Mechanical, Thermal & Fuildic konwledge and experience.
3. Open discussion and sharing of comments and experiences in the loop of hardware/software technology and technique to improvement the future Computer I.T. industry.
4. Provide detail and easy to understand guides for Computer DIYers from Dummy to Crazy Expertise.

Interested? Buy me a cup of coffee and a piece of cake~ we can share the advanced ideas to you ;)

TOP