回覆 100# PPLd

一個用目測都見到針腳有問題嘅cardreader都話功能正常
有花痕對佢黎講更加會話冇問題
你可以去信kingston投訴
睇下係聯強冇send返廠敷衍了事定係kingston QC係有問題

TOP

As I said, they returned my original USB back to me after whatever inspection they did, gifting me ...
PPLd 發表於 2016-9-20 15:13



    so you confirmed that they returned you original untouched, unrepaired fautly card-reader  with damaged, bended pins in SD slot, isn't it? This "damaged / bended" pins card reader cannot work normally either in July for inspection and 15, Sept. when you be there for pickup, isn't it ?

If it's the case that the card reader is unrepaired and it doesn't function well,  it's unresonable that you are not complaning for no repariment but the scratch.  Synnex has not completed anything for scope of its warranty service.

TOP

"幾十蚊入去整一來一回車費都分分鐘蝕埋, 仲未計時間 (分分鐘要請假)." ... agree

"同意去森林買仲好" . ...
pc1668 發表於 2016-9-20 14:09


近年就係好多人覺得有保 = 無保, 所以越來越多人去森林.
你可以話無關係, 不過事實係去森林買野的人越來越多

TOP

回覆  PPLd

一個用目測都見到針腳有問題嘅cardreader都話功能正常
有花痕對佢黎講更加會話冇問題 ...
mrrrwhat 發表於 2016-9-20 15:39



    其實睇番樓主張唔清唔錯既取貨單, 確實無提到是否有維修過. 對番提貨單同維修單S/N 應該一樣

但我重睇聯強俾樓主既維修單, 見到有以下一句
Capture.JPG
代送原廠確認保用.
咁其實, 樓主係咪已經在15/9 知道Kingston 已經唔保件貨. 但件貨有花痕而報警就不得而知了.
但憑樓主幾次回話15/9 聯強俾番佢個card reader 係無維修, 無整過. 雖然樓無答到攞番個card reader 時彎腳是否已變正. 但有理由相信Kingston 早已經拒絶保養樓主呢件貨了.

咁樓主是否應該投訢Kingston 不合理拒保才是呢?

TOP

Jeez... aren't Kingston stuff warranted by Viewking?
http://www.viewking.com.hk/Contact.html

Why OP (ow whoever) decided to get Synnex-warranted Kingston product without doing homework?  Why OP decided to make a scene here in the Forum?

I have G4 readers too and one of them failed a year after purchase (card cannot be recognised in one slot), went back to VK with original sales receipt and warranty sticker and instantly got free replacement (which continues to work without problem)

And BTW, given G4's body design, it's quite easy to get even light scratches under careful handling...
And if used for long periods, slight oxidation does occur on metal surface as well

TOP

不如大家夾番75蚊俾樓主
http://www.jumbo-computer.com/pr ... ;desc=G4&sort=0

TOP

回覆 104# 556556bt

你唔放大張單都唔覺
可以確定係synnex個員工有問題
其一
張單上面個"彎"字打咗做"灣"字 ,好明顯個職員做事非常大意
其二
處理彎針問題正常都會用"人為損壞"為由拒保,根本唔應該浪費大家時間send返廠
就算係購買日起七天内各大腦場sales 99.99%都會用"人為損壞"為由拒保 除非當面開

比我係個主任就比個新cardreader樓主先解決咗件事先
之後就炒咗個look7

TOP

回覆  556556bt

你唔放大張單都唔覺
可以確定係synnex個員工有問題
其一
張單上面個"彎"字打咗做"灣"字:x ...
mrrrwhat 發表於 2016-9-20 17:24



    咪抽個彎子啦.. 哈哈.  
其實, D 代理做到慣晒. 點會收左件貨又會原封不動不整不修一個月後交番俾個客呢?! 好多時都係即場會講你知處理方法. 換貨定維修. 既然樓主堅持收番既件係無維修過(樓主都無主動應維修部份), 廠方只有係不保情形下才會交回不維修零件.

TOP

繼續推post
期望synnex關注此post
好好訓練員工應對特殊情況
面對有心人又影相,又錄音,又報警嗰d會處理得更妥當

TOP

people here are either very rich or my frd wrote bad Chinese, such that people would keep asking about the repair.

TOP