samhcl

ek用鋁整臭自己?
steveshing 發表於 2017-6-11 02:46

唔一定，其實我覺得EK想開發新中底/底下市場。

始終一，未有人做，自己個名夠響，可以/可能帶領出新市場(生意)

二，銅的覺比鋁好，但成本較高也是現實。

如果用鋁平D但性能只比銅的(或自家成功的銅model)差不多於兩/三成但賣平40%,咁真有可能到時全民水冷(FF中)

samhcl

Open Box + setup !
https://www.youtube.com/watch?v=Iqg6z-4DhxM

If (IF) EK success... maybe in future all brands release aluminum water cool parts....

hlchung1879

其實鋁排有咩唔好？
實際上賽車全部都係用鋁排
連F1都係用鋁排
？？？？？？

samhcl

F1 要越輕越好
唔通用銅排咩
(點解F1 用鋁排? 因為無得揀!  ) ...
嘩!嘩嘩! 發表於 2017-6-15 15:18

Agree, this is the main reason.

samhcl

其實鋁排有咩唔好？
實際上賽車全部都係用鋁排
連F1都係用鋁排
？？？？？？ ...
hlchung1879 發表於 2017-6-15 14:28

Weights is one of the MOST IMPORTANT issue from F-1.

Between copper and AL (鋁)  Just think in this way:

- why we ask for copper based / full cooper heat sink air cooler other then full AL (鋁) heat sink?
  (heat pipe normally made by copper)


Same reason from water cooling.

hlchung1879

好多英文????

ncdavid2560

銅加鋁會有電瓶效應，ek無理由打倒退架喎

via HKEPC Reader for Android

LoneGumMan

全部人都冇睇到 EK 究竟出左乜?
你買佢成套, 連fitting 都係铝. 套野冇用銅.

佢應該係出緊條 value line..平啲, 又輕啲, 通嬴.