hgcjeffrey

回復 29# leungwaiyin


    而家GT1850已經靜到飛起，
    所以唔算係噪音換取效能，係金錢換取效能多D
    DOMINATOR 其實都幾熱下，既然用得DOMINATOR +塊BLOCK就OK，
    最緊要自己鐘意

FeverMike

Dear All C-hings,

All you guys are too amazing for a newbie in liquid cooling like me, especially jeffrey & amuro, thanks all of u. All u guys just provided tons of valuable information to me at once, i think i need some time to go through before i reply to all u guys individually. thanks again in prior to trouble u guys very soon after i went through the information. ^^"

hgcjeffrey

回復 30# FeverMike

咩因素決定用唔用調速版?
調速版分5個lv，定速版既速度大概係調速版第4個lv，
一舨都會揀調速版，降速換取靜音。要靜能靜要勁能勁

http://www.xs-pc.com/products/la ... r/acrylic-dual-5-25”-reservoir-for-laing-d5/
The above is top + reservior, right?? use this ok??
鐘意就得

你講果2間我久唔久都睇佢地個網, 就係見佢地唔夠齊,
所以問下有冇d我唔知o既商號(如online shop)
應該都係o個幾間 or 淘寶 & performance-pcs, 其

他果d係已經有人pm左我
(真快手 )

FeverMike

回復 18# Amuro0079

Great selection on CPU and motherboard blocks.  Personally I would not water-cool the RAM since it's considered a low heat source.  It's just not worth the hassle and the added restriction to the loop.
i ever read some posts had stated that the surface temp. of ram is over 60-70 degree(c) when oc above ddr3-2000, that's why i would consider the ram blocks for the dominator GT, is it correct? And how about does it worth to eqiup a m/b block in the view of thermal field?

HWLabs GTX series are the best performing radiators.  They outperform any other brand from mid-low to high fan RPM settings (basically above 800 RPM nothing can touch it).  In my previous built, I had a HWLabs GTX 480 radiator and it did a great job cooling  a 980X @4.13Ghz  and two GTX 480 SLI at 850/2000 with fans at around 1300 RPM.
They seems very nice, i am considering for a 420 radiator, but not much issues for triple 140mm fan radiators are available from the common brands except koolance & hwlabs, any 140mm fan recommendation for the hwlabs GTX420?

For reservoir, if you have two extra 5.25in bays, the Koolance RP-452X2 Dual 5.25in Reservoir for 1-2 PMP-450/S Pumps is very good.  Just make sure it's Rev. 2.0:
http://www.koolance.com/water-co ... php?product_id=2025
This is very nice as well, and i was condering the Acrylic Dual 5.25" Reservoir for Laing D5 before
http://www.xs-pc.com/products/la ... r/acrylic-dual-5-25”-reservoir-for-laing-d5/
any comment?

honestly, most of ur advice just like a support to my foundings obtained from diff. forums, diff. product webpages...etc

Amuro0079

回復 30# FeverMike

http://www.xs-pc.com/products/la ... r/acrylic-dual-5-25”-reservoir-for-laing-d5/
The above is top + reservior, right?? use this ok??

Don't use XSPC arylic bay reservoirs as the sides are pieced together with glue, and alcohol as well as some ingredients in premixed coolant can dissolved the glue causing leaks.  Also, the glue they use smells very bad, like burning silicon.  I had a XSPC dual bay res for single DDC pump a year and a half ago, and my entire loop gave off a strong chemical smell after about 3 weeks.  At first I thought my PSU was bad, but it turned out that the culprit was the glue that XSPC used.  The smell permeated through the Tygon tubing that I was using, so when I turned on my computer my entire room would smell like burning silicon.

The Koolance reservoir I recommend is machined from one solid piece of acetal, and no glue is used.  Also, it allows you to join the two the two water compartments together if you're using one pump or running two pumps in series.

FeverMike

回復 19# Amuro0079

BTW, avoid EK water blocks if you can.  
Thx for this reminder & no worry, i didn't consider the EK's blocks...
what i meant was not pretend to be an expert, it was just bcos of visual enjoyment,
i believe the visual enjoyment is somehow important as the cooling performance in
a liquid cooling system XD

FeverMike

回復  35# Amuro0079
understood!! so lucky to know this in this stage

Amuro0079

個人意見是選CPU冷頭是選樣子/價錢
那個性能的分別..你裝得好一點/差一點已經沒大分別的了
另外冷排,小的也 ...
samtch 發表於 2012-2-12 20:39

I'd go for Black Ice SR-1 for noise and performance balance.

hgcjeffrey

回復 35# Amuro0079


    ching睇黎係超完美主意者，少少瑕疵都唔可以有，盡善盡美       
    出過事點都會有條刺

Amuro0079

回復  Amuro0079


    ching睇黎係超完美主意者，少少瑕疵都唔可以有，盡善盡美       
    出過事點都會 ...
hgcjeffrey 發表於 2012-2-13 01:32

I was lucky, actually, as I didn't experience any leaks with it during my one year of using that res.  

Some ain't so lucky and experienced leaks:
http://www.xtremesystems.org/for ... r-Laing-DDC-leaking

Most people will tell you to avoid acrylic bay reservoirs due to their high risk of leaking.