kimleung

之前正都都有一個model賣過.

pang0011

原帖由 kimleung 於 2009-8-23 01:38 發表


佢地通常會有1.5MM厚,
legend 會有2mm,

題外話,
之前外國有個forum email去星野,
同佢講話要訂十幾個機箱(團購之類但無平過),
payment 唔係問題,
但係要由星野付負幫忙寄出(郵費佢地自己比翻),
剩係叫星野幫幫手,
星野一樣say no,
真係有性格.

我去search過搵到www.soldam.co.jp  有賣星野Case又有D英文既F&Q, http://www.freewebs.com/elpibe10/faqaboutwindycases.htm,  佢話"All cases are custom built and I have personally experienced delays of more than 2 months before my order was shipped"

咁睇可能星野間廠只係做小規模既生產, 又或者可能接到單先做, 所以至有你講既情況.

madcc

我鍾意個幾款都冇左

WiNDy ALTIUM FSR2000

WiNDy ALCADIA ZR2000

[ 本帖最後由 madcc 於 2009-8-23 16:16 編輯 ]

mig33

仲話charge人吔USD100 translate一隻日文字

估計佢哋两三個人手作仔

如果有學過金工的師兄，都可以開檔，只需投資買機床，噴漆設備

kimleung

ZR SERIES 係好嘢嚟架.

mig33

JPY12,700 for 30Kg parcel by air, about HKD1,000 freight cost

Don't know whether can buy the case from Akihabara shop?

sup

原帖由 mig33 於 2009-8-26 13:42 發表
JPY12,700 for 30Kg parcel by air, about HKD1,000 freight cost

Don't know whether can buy the case from Akihabara shop?

they use to sell in Akiba, but not anymore
sometimes you can find some 8-90% new demo case selling at 10,000yen
but very very rare

夜凉如水

WiNDy 神器啊，可惜倒闭了。

kimleung

原帖由 夜凉如水 於 2009-8-27 12:28 發表
WiNDy 神器啊，可惜倒闭了。

幾時呀?
成間嘢重run緊.