abc2012

回覆  reddogdog


   
我自己屋企用緊有6部 mx200, 0部 mx300
上個月重買定左2部 mx200後備

via HKEPC  ...
hkd 發表於 2016-12-2 20:16

家用要 8 部咁多嘅

wklie

回覆 228# reddogdog

AnandTech:

littletiger

2個MX300尋晚已送左過黎(UK)

wong123456

MX300 12月1 已到香港

ykmran

已經壞左
未copy晒d data已經死左本身隻ssd有問題
試過兩部機都一樣
xander見

1. [  244.068126] ata3: link is slow to respond, please be patient (ready=0)
   
2. [  254.794318] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
   
3. [  254.794571] ata3.00: supports DRM functions and may not be fully accessible
   
4. [  254.844211] ata3.00: supports DRM functions and may not be fully accessible
   
5. [  254.845555] ata3.00: configured for UDMA/133
   
6. [  254.845560] ata3.00: device reported invalid CHS sector 0
   
7. [  254.845581] ata3: EH complete
   
8. [  254.894257] ata3.00: Enabling discard_zeroes_data
   
9. ...
   
10. [  457.373067] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 18
    
11.                         res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
    
12. [  457.375733] ata3.00: status: { DRDY }
    
13. [  457.376457] ata3: hard resetting link
    
14. [  462.895164] ata3: link is slow to respond, please be patient (ready=0)
    
15. [  467.421134] ata3: softreset failed (device not ready)
    
16. [  467.422137] ata3: hard resetting link
    
17. [  472.930062] ata3: link is slow to respond, please be patient (ready=0)
    
18. [  477.435456] ata3: softreset failed (device not ready)
    
19. [  477.436458] ata3: hard resetting link
    
20. [  482.944473] ata3: link is slow to respond, please be patient (ready=0)
    
21. [  512.477449] ata3: softreset failed (device not ready)
    
22. [  512.477449] ata3: softreset failed (device not ready)
    
23. [  512.478461] ata3: limiting SATA link speed to 1.5 Gbps
    
24. [  512.478463] ata3: hard resetting link
    
25. [  517.527417] ata3: softreset failed (device not ready)
    
26. [  517.528424] ata3: reset failed, giving up
    
27. ...
    
28. [  603.410238] sd 2:0:0:0: [sda] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    
29. [  603.410242] sd 2:0:0:0: [sda] tag#24 CDB: opcode=0x28 28 00 00 00 08 80 00 00 08 00
    
30. [  603.410243] blk_update_request: I/O error, dev sda, sector 2176
    
31. [  603.416502] Buffer I/O error on dev sda1, logical block 16, async page read
    
32. [  603.809258] sd 2:0:0:0: [sda] tag#26 UNKNOWN(0x2003) Result: hostbyte=0x04 driverbyte=0x00
    
33. [  603.809262] sd 2:0:0:0: [sda] tag#26 CDB: opcode=0x28 28 00 00 00 08 80 00 00 08 00
    
34. [  603.809263] blk_update_request: I/O error, dev sda, sector 2176
    
35. [  603.838476] Buffer I/O error on dev sda1, logical block 16, async page read

複製代碼

luke123

已經壞左
未copy晒d data已經死左本身隻ssd有問題
試過兩部機都一樣
xander見 ...
ykmran 發表於 2016-12-3 17:56

How much data was copied to the MX300 in one go?

beenoliu

回復 235 #ykmran

人心惶惶

via HKEPC Reader for Android

freefdhk

回復 ykmran

人心惶惶  

via HKEPC Reader for Android
beenoliu 發表於 2016-12-3 21:10

99蚊既燒鵝用到幾個鐘算係咁 ～ D人話絕對收貨

用TLC 比人知仲 樣衰過用IDE hard disk , 又多暗病又易壞又會突然變慢
有如 將幾g ram cache 落去張 sd/cf card 到用 over 左又變慢 又易壞

不過今日去黃金睇 清一式寫 TLC 真係無力去買 ssd

ykmran

How much data was copied to the MX300 in one go?
luke123 發表於 2016-12-3 20:27

其實我只係想將400GB (os) data抄落隻ssd度，三次都未到一半出io error，os入面成個block device唔見埋，reboot就會出現返

一開始我以為sata線爛或者主機板sata port爛，試過幾個combination之後換落部notebook再試，確定係ssd問題。