billyck2

硬係有人要自尋短見

sam1chu

硬係有人要自尋短見
billyck2 發表於 2019-4-3 17:52

玩下無妨，但用來放重要野就吾好喇

via HKEPC Reader for Android

billyck2

玩下無妨，但用來放重要野就吾好喇  

via HKEPC Reader for Android
sam1chu 發表於 2019-4-3 19:07

我係話D人唔怕BAN,挑戰版主,直出不能說鏈接

st1000

啱啱訂左部 a款 i211，請問有冇ching 可以分享一下freenas 教學，謝

sam1chu

我係話D人唔怕BAN,挑戰版主,直出不能說鏈接
billyck2 發表於 2019-4-3 19:29

新手

via HKEPC Reader for Android

asian_xl

^ 我都9衝咗Set A

Offer

啱啱訂左部 a款 i211，請問有冇ching 可以分享一下freenas 教學，謝
st1000 發表於 2019-4-3 21:13

    1 st , upgrade to 8g ram

asian_xl

8M ram?

st1000

1 st , upgrade to 8M ram
Offer 發表於 2019-4-3 22:44

    8g ram？
其實只係想bt，share file/片/music  比tvbox，ipad 睇，除左不能說，仲有邊d free os 好介紹！ 冇lunux 底！

rfdingo

手快打錯者

https://freenas.org/hardware-requirements/
Basic Requirements
Boot Device: 8 GiB is the absolute minimum. 16 GiB is recommended.
64-bit hardware is required for current FreeNAS releases. Intel processors are strongly recommended.
8 GB of RAM is required, with more recommended.
FreeNAS 9.2.1.9 was the last release that supported 32-bit hardware and UFS filesystems.
SSDs, SATADOMs, or USB sticks can be used for boot devices. SSDs are recommended.
8 GB of RAM is the absolute minimum requirement. 1 GB per terabyte of storage is a standard starting point for calculating additional RAM needs, although actual needs vary. ECC RAM is strongly recommended.
Directly-connected storage disks are necessary for FreeNAS to provide fault tolerance. Hardware RAID cards are not recommended because they prevent this direct access and reduce reliability. For best results, see FreeBSD Hardware Compatibility List for supported HBA disk controllers. LSI/Avago/Broadcom HBAs are the best choice with FreeNAS.
NAS-specific hard drives like WD Red are recommended.
Intel or Chelsio 1 GbE or 10 GbE Ethernet cards are recommended.


所以我只打算淘多部試下omv