arrychiu

我都唔明,返唔到轉頭係指咩?
係幾年後只可以再補鍍膜?
meowmi 發表於 2019-4-29 00:59

以我所知鍍膜好似係一種晶體，好難完全清除。

Hidekii

因為做完鍍膜車身骨位線條會圓咗，望落去無咁硬朗。
arrychiu 發表於 2019-4-29 13:25

鍍膜一般得幾μm, 唔會咁大影響

Hidekii

以我所知鍍膜好似係一種晶體，好難完全清除。
arrychiu 發表於 2019-4-29 13:38

打轉粗蠟就拋走

arrychiu

鍍膜一般得幾μm, 唔會咁大影響
Hidekii 發表於 2019-4-29 14:11

我AB比較過，覺得好大分別，
當然每個人感觀唔一樣。

arrychiu

打轉粗蠟就拋走
Hidekii 發表於 2019-4-29 14:12

9H咁硬打蠟打得走？

kf

回覆 16# backspace-hk

會唔會甩油 真係唔知
貼嘅時候 都有同師父傾計 先mark低呢架車 有冇其他花痕 或者凹凸甩油 傾計期間 師父講 有啲車 曾經翻噴 一貼一搣 就甩油喇
如果有興趣貼膜 咪問清楚 新車原裝油 貼完膜 第二時 撕膜在翻貼 會唔會甩油

Hidekii

9H咁硬打蠟打得走？
arrychiu 發表於 2019-4-29 15:01

一般鍍膜粗蠟(compound)已拋得走

ericshum07

想知一般打蠟，大雨或水槍近距離射係咪會慢慢流失??

PPLd

因為做完鍍膜車身骨位線條會圓咗，望落去無咁硬朗。
arrychiu 發表於 2019-4-29 13:25

    Sounds like the coating guy gone through the clear coat of your car during preparation?
It is very common on cars like BMW and Audi with thin paint.

Edit: The following is something I drew many years ago.
It is an accurate presentation of how a new car's paint will look like when coming out from factory,
and copied / referenced by many web sites, blogs, and guides online:

PPLd

9H咁硬打蠟打得走？
arrychiu 發表於 2019-4-29 15:01

    particles inside wax is about 10x to 100x harder than 9H .
9h coating is very soft
even 6 years old kid can grind it