Debian Testing edition安裝完之後出現問題[有圖]!!急

Rank: 2 Rank: 2

21^# 跳轉到 »

發表於 2008-12-26 21:50 | 只看該作者

原帖由 foobar 於 2008-12-26 21:47 發表
Install 完之後會係你朋友 set ISPCP 定你自己 set? 如果係你朋友 set 的話你問o下佢要 etch 定 lenny (version 名黎架).

你塊板用張 LAN Card 99% Debian Stable 版 (etch) 個 Kernel (2.6.18) 未有 Driver, Debia ...

我朋友set

可以的話你可否助我
急住架好環境
現在論壇係借住人地個空間
本身個個完左plan

TOP

foobar

中級會員

Rank: 2 Rank: 2

22^#

發表於 2008-12-26 21:55 | 只看該作者

原帖由 vivi2341 於 2008-12-26 21:50 發表

我朋友set

可以的話你可否助我
急住架好環境
現在論壇係借住人地個空間
本身個個完左plan

ISPCP 本身好似有教裝落 etch 到, 你試o左隻 etch-and-half install CD 先啦. 如果佢唔 prompt 你話 detect 唔到 LAN card 咁 install 應該唔難架.

TOP

howdy

Moderator

Rank: 7 Rank: 7 Rank: 7 Rank: 7 Rank: 7 Rank: 7 Rank: 7

23^#

發表於 2008-12-26 21:59 | 只看該作者

原帖由 vivi2341 於 2008-12-26 23:21 發表

motherboard is Intel DG33BU
http://www.intel.com/products/de ... DG33BU-overview.htm

seems you are using 82566DC onboard LAN chip...
and supposedly the e1000 module should be what you need if you're using testing (Lenny), though there also seems to be cases where ppl reported it didn't recognize the network card. I would try to load the kernel module manually , with `modprobe -v e1000` and see how it goes

TOP

vivi2341

中級會員

Rank: 2 Rank: 2

24^#

發表於 2008-12-26 22:01 | 只看該作者

原帖由 howdy 於 2008-12-26 21:59 發表

seems you are using 82566DC onboard LAN chip...
and supposedly the e1000 module should be what you need if you're using testing (Lenny), though there also seems to be cases where ppl reported it did ...

多謝你地解答我的問題..我試既岩岩樓上巴打叫我下個隻cd 睇下得唔得先

TOP

joshua_tam