本帖最後由 futuret 於 2017-2-4 09:05 編輯
tvbau 師兄你好,
同你做個簡單既實驗,你就知我講既就係無錯架喇!(各位版友都可以照住做,睇下我講既 ...
天文台 發表於 2017-2-1 12:11 
as long as your headshell are locked with the tonearm and there are screw to fix the cartridge, it would be another story, also if your headshell / cartridge (ortofon spu series) could not adjust the Azimuth, it would be other story.
Besides, assume your platter & the turntable are set on 100% horizon, no matter your adjust the VTA, the tonearm will still iin parallel with the platter. it will never going up in the back and down in the front like the two pen example you share
The VTA will only effect the angel that needle that running in the pit on the disc
To be honest, I do with the headshell can / cannot adjust the Azimuth, and actually I don't found any relationship between VTA with Azimuth. Which temperature / humanity / brand of the LP + year of production (“RIAA decoding”) , impact it much
some old school headshell as example
SAEC - ULX3X ( photo fm hifido)

SME - S2 (photo fm hifido)
 |