wl00154014

回覆 7# t9097


    自己輸入code或set code比佢放探針出黎

xo_ox

師兄們勁，學野中

Yucie

回覆  t9097


    自己輸入code或set code比佢放探針出黎
wl00154014 發表於 2020-5-14 19:44

Testing
When the BLTouch is first powered up it does a self test – Starting with the pin up it them goes
down/up 3 times and ends up the the LED on solid. Continuous flashing means that there is an
obstruction or fault.
The BLTouch acts on the following gcode that can be used manually to diagnose faults etc but you
don’t need to normally worry about them.
M280 P0 S10 ; pushes the pin down
M280 P0 S90 ; pulls the pin up
M280 P0 S120 ; Self test – keeps going until you do pin up/down or release alarm
M280 P0 S160 ; Release alarm
Alarm – The BLTouch can sense when something is wrong and then goes into alarm mode which is
continuous flashing. Alarm can be triggered like an obstruction that stops the pin going up and down
freely, it could be dirt etc.

https://locxess.de/3d/BLTouch_Anleitung_englisch.pdf
GOOGLE 一下, 網上大把

wl00154014

回覆 13# t9097


    仲研究緊,因為自己手動set試行
但係如果按Run Mesh Grid Compensation就會出問題,
會唔識停撞落熱床

wl00154014

聽晚再試試,想趁禮拜六日睇下set唔set得好

wl00154014

回覆 17# t9097


    今晚再試試

vvserpent

我想問問, Duet 好像可以用12V 或 24V 作電源. 那怎麼決定用12V 還是 24V ？
另外step motor 有分 12V / 24V 嗎？
謝謝