gorto

e鬆 抄料抄錯咗
reprap唔係機型而係一個 term
bam1a 發表於 2017-10-16 16:34

你同醫鬆都冇錯，最初的確有部始祖機叫 reprap，佢帶起咗自己復制嘅開始，之後就開始用 reprap 嚟形容呢様嘢。
可參考 www.reprap.org

bam1a

你同醫鬆都冇錯，最初的確有部始祖機叫 reprap，佢帶起咗自己復制嘅開始，之後就開始用 reprap 嚟形容呢 ...
gorto 發表於 16/10/2017 23:42

些小錯誤
點解係term,係因爲呢個係一個大學project,然後引申出一堆繼承佢個種"有能力自我複製部件"呢個概念嘅term,而唔係一個機型名
最初嘅reprap專案機係叫Darwin,而唔係reprap.
你睇個首頁個隻叫mendel,都係個個大學嘅reprap專案嘅一員,係Darwin嘅改良版

ustkl

回覆 812# bam1a

唔好其望有咁準確嘅報導, 始終都是一本消費電子產品雜誌, 報下多D人認識下已很好了。現在還有很多朋友以為3DP 要幾萬元才能入門呢。

ustkl

節錄於1000期e-zone

以Lau 經理的角色, 有以下的言論是無可厚非的。

gorto

些小錯誤
點解係term,係因爲呢個係一個大學project,然後引申出一堆繼承佢個種"有能力自我複製部件"呢個 ...
bam1a 發表於 2017-10-16 23:13

From: https://en.wikipedia.org/wiki/RepRap_project

RepRap was founded in 2005 by Dr Adrian Bowyer, a Senior Lecturer in mechanical engineering at the University of Bath in England. Funding was obtained from the Engineering and Physical Sciences Research Council.
On 13 September 2006, the RepRap 0.2 prototype successfully printed the first part of itself, which were subsequently used to replace an identical part originally created by a commercial 3D printer. On 9 February 2008, RepRap 1.0 "Darwin" successfully made at least one instance of over half its total rapid-prototyped parts.  

初期只叫 Reprap，到 1.0 先俾個名佢叫 Darwin。

ustkl

朕要風筒

alancck

朕要風筒
ustkl 發表於 2017/11/7 10:56

黑毛獅皇

ustkl

獅王來了。

fred2088

回覆 818# ustkl


    好有王小龍 "飛仔" Feel ...

ustkl

終於有用家開箱文了
http://www.jasonworkshop.com/2017/11/20171107.html