Q13. 點解我用DDR-2 667, 係CPU-Z又睇到佢只係行333? 係唔係間鋪呃我?
A13. 正常. DDR 係 Double Data Rate, 333係單向速度, 雙向就當然X2, 行667啦

DDR2 nothing about direction etc.

DDR already represent the data transfer when it rise and fail on the clock cycle.

DDR2 is double the bus (external to chipset/NB) of ddr. So no internal up on the ram clock, but, the "output" doubles....

TOP

Q11 應該寫埋AMD 係有Cool'n'Quiet

TOP

Good !! Keep on

TOP

stick to the point , 樓主答卷冇難度!

支持!

TOP

置頂喇∼∼
各位都加多d q&a喇!有時間我都會post下,等樓主更新

TOP

原帖由 Mathk 於 2007-5-7 02:26 發表
好有心。
"save mode" 應為"safe mode"

clean bios
clean cmos
should be 'clear cmos'

TOP

太多問題只會適得其反

人地想問一個簡單問題, 你就要求人地巨細無遺地睇左lee度先, 如果唔睇又話人.

我認為精簡d, 例出最重點就好. 太多都係多餘.

TOP

CPU 方面可以加這一個chart:
http://www23.tomshardware.com/cpu.html
可以比D人做一下reference去買CPU~

TOP

Q15 不正確

家用版Windows 會用15-25% 來做 pointer storage table
Linux/UNIX LIKED PLATFORM 會用 1GB 來作storage table

如要全數使用4GB RAM,系統必須支持RE-MAPPING 來重新讓使用者畫分addressing(取代os的addressing的黃金比),這點和 64bit 並無關連。

TOP

原帖由 lsman1 於 7/5/2007 07:04 發表
Q13. 點解我用DDR-2 667, 係CPU-Z又睇到佢只係行333? 係唔係間鋪呃我?
A13. 正常. DDR 係 Double Data Rate, 333係單向速度, 雙向就當然X2, 行667啦

DDR2 nothing about direction etc.

DDR already repre ...

Is it related to the difference between the prefetch buffer of DDR and DDR2?

原帖由 M9 於 7/5/2007 12:18 發表
       
Q15 不正確

家用版Windows 會用15-25% 來做 pointer storage table
Linux/UNIX LIKED PLATFORM 會用 1GB 來作storage table

如要全數使用4GB RAM,系統必須支持RE-MAPPING 來重新讓使用者畫分addressing(取代os的addressing的黃金比),這點和 64bit 並無關連。

不過...用64bit可以玩盡佢都係真的啊
不過多謝你補充remapping呢個pt.

[ 本帖最後由 福頭蛋撻 於 2007-5-7 15:12 編輯 ]

TOP