Niel兄 : 行RAID 0 可吾可以Update
T5HO 發表於 2010-10-24 00:57



唯一方法: Disable左個RAID,再用裝o係其他Storage Device的OS去update or 拆左d SSD去第二部電腦update

TOP

吾該晒

TOP

nice report

TOP

求救 !! 死左其中一隻ssd ?!
而家情況係咁 , 開頭用updater 一次過flash 兩隻ssd
但重開機入win 之後 , 發現一隻冇flash 到
好啦 , 剔那個ssd 再flash 多次 , 係途中 , loading 850 停左
自己手多剔個updater 界面一下 出現沒有回應 跟住就bsod .....

心諗 : 吾係flash 死左呀

load bios default > set 好哂 , 重裝win
發現祗係認到其中一隻 另一隻no detected ?!
如下圖





係咪死左?
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

求救 !! 死左其中一隻ssd ?!
而家情況係咁 , 開頭用updater 一次過flash 兩隻ssd
但重開機入win 之後 , 發 ...
Yahoo! 發表於 2010-10-24 10:37



唔係Load BIOS default,係用底版reset jumper

TOP

回復 15# Niel

攪掂左了

TOP

回復  Niel

攪掂左了
Yahoo! 發表於 2010-10-24 15:26


恭喜恭喜~

TOP

將隻ssd 放落第2部腦update, 一take過搞掂

TOP

想問一下: 如果SSD係OS DRIVE既話, UPDATE個時係咪一定會有BSOD咖?

TOP

The same situation applied to me:  stop at sector 850, no restart and then system hang, after manual reset, ssd not detected.
Solution for me: unplug the ssd and connect again, the ssd is detected and booted into win7, checked with crsytalinfo, firmware is 1.23 already.

I dont feel comfort with the system hang before, so i booted into the win7 installation disc and use the repair command prompt to upgrade the ssd again, the program works normal with successful message.

Hope this help the one who haven't upgrade.

TOP