Will use fastcopy (with verify on) to copy files to the new hdd to its full capacity.  If there is no verification error, I would assume it works.  May perform a full scan sometime later (if available).

TOP

即插即用,會 mon 吓 S.M.A.R.T 有冇 error.

TOP

以前唔會, 宜家會做一次 long-test 先用。
GbE 發表於 2016-8-23 12:59 PM

Long test is just too long, can take hours and/or days
Usually just do a short test and monitor SMART status after that

TOP

插落去就用,唔理~  7日比你試~

TOP

本帖最後由 GbE 於 2016-8-23 17:30 編輯

Short test 2~3 min, 試唔真.
邏輯好簡單, 唔試就用, copy or move 途中先發覺出事, 你咪又要做過, move 仲大鑊.
Copy/Move 又唔會試到全部 sector, 如果用晒 99.9% capacity, 所需時間一定慢過做一次 longtest. 做一次 longtest 我起碼放心好多.

Longtest 3TB ~9hrs, 6TB ~11hrs, 唔駛 days. ( 註 : 唔會用廠商嘅軟件 (CPU做可能好慢), 用 harddisk build-in 嘅 SMART longtest )

呢 d 始終係個人喜好.

TOP

唔會,普通用家,quick format即用,最多睇下SMART及PowerOn時間就算

TOP

回覆  diy-apprentice


    我剛買了4隻4T紅盤,都冇做即用,因爲電腦不能開過夜,會比老虎小,如在nas用 ...
roychow1420 發表於 2016-8-22 23:40

我會分幾晚去分partition format,  做完Del 多餘partition再擴容量

TOP

desktop 用只做quick format
nas 用建raid 由nas 做

1. Full format (不是快速format) ?
2. Full scan error ?
chkkan 發表於 2016-8-22 22:57

TOP

我會用partition軟件去睇睇

TOP

提示: 作者被禁止或刪除 內容自動屏蔽

TOP