打印時候有黑線

w28stanley

打印時候有黑線,請問有冇師兄知道原因和解決方法?
Thanks ....

下載 (149.45 KB)

2017-10-13 15:55

wyhui5124

Inkjet定Laser?D 線係打橫定打直?

protractor

is it epson inkjet?

w28stanley

回覆 2# wyhui5124


    Inkjet ,望住張a4紙直出,黑線就是打橫

w28stanley

回覆 3# protractor


    Canon MG5470 Inkjet

wyhui5124

回覆  wyhui5124


    Inkjet ,望住張a4紙直出,黑線就是打橫
w28stanley 發表於 2017-10-14 12:50

    咁要做一次print head alignment。

w28stanley

回覆 6# wyhui5124


    手動打印頭對齊,自動打印頭對齊,都做過,冇用!都係唔得!

wyhui5124

回覆  wyhui5124


    手動打印頭對齊,自動打印頭對齊,都做過,冇用!都係唔得! ...
w28stanley 發表於 2017-10-14 13:03

    睇番你之前話呢部機有時會print白紙,而依家仲有黑線,咁有機會係硬件損壞/損耗,參考MG52XX service manual Troubleshooting,試吓洗D墨盒/墨頭contact 睇吓得唔得先囉

Unsatisfactory print quality
(1) Confirm the ink tank conditions:  
- No remainder of the outer film (the air-through must be opened)
- Whether the ink tank is Canon-genuine one or not
- Whether the ink tank is refilled one or not
- Re-setting of an ink tank
(2) Remove foreign material from the purge unit caps, if any.  
(3) Confirm the conditions of the carriage head contact pins.  
(4) Perform cleaning or deep cleaning of the print head.  
(5) Perform print head alignment.  
(6) Replace the following item(s):  
- Print head, and ink tanks
- Logic board ass'y
- Purge drive system unit
- Carriage unit

https://www.commentreparer.com/i ... al-canon-MG52XX.pdf

KinChungE

回覆  wyhui5124


    手動打印頭對齊,自動打印頭對齊,都做過,冇用!都係唔得! ...
w28stanley 發表於 2017-10-14 13:03

用最高quality print就得

w28stanley

用最高quality print就得
KinChungE 發表於 2017-10-14 13:59

    得喎! 用高列印品質,真係冇咗黑線.
    我平時只係用標準列印....Thanks.....