sv_sti

回復 130# K_C_


    人窮志短. 哈哈哈哈~~ 真正有心無力

pang0011

A little bit Off Topic/Thread:

WoHoHo, 四大公司泊碼頭(唔明意思的可以Google一吓):

Ducky1087白無刻

...
lovelykeroro 發表於 2010-10-25 16:46

想要隻白無刻

Ching, what are the differences between 103U & 103UB?
hoihoi_san 發表於 2010-10-25 15:18

RF103U係白色, RF103UB係黑色

pang0011

講開勞力士前排睇到報紙話而家佢既最主要市場係中國同香港, 而佢其實有26%既零件係由中國生產, 所以報紙話Rolex doesn't tick without China.  不過瑞士好似話打算規定日後所有Made in Swiss手表都要100%所有零件都要係瑞士造, 咁意味住勞力士可能要因此加價.  但問返D大陸人, 佢地既反應居然係話好, 佢地話唔介意加價, 願意付出較高價錢買更100% MIS既勞力士, 對呢個政策非常歡迎云云...,

我想講既其實係唔同既市場對唔同價格既貨品有唔同既需求, 有無師兄都睇過呢編報導

lovelykeroro

講開勞力士前排睇到報紙話而家佢既最主要市場係中國同香港, 而佢其實有26%既零件係由中國生產, 所以報紙話R ...
pang0011 發表於 2010-10-25 17:59

真係要100% made in Swiss恐怕好難, 鐘錶入面D parts真係好多, 要一間或有限量的廠供應哂全部零件, 個成本一定會相當驚人, 就算得一來產量會有限, 二來要賣天假先可以keep到個profit margin, 所以隨非有一套嚴格監察機制, 唔係就無人真係可以保証佢成件product都係100% made in XXXXX

講開又講, Realforce號稱made in japan, 唔知係咪連所有parts都係全日製...相信機會好微

Mitsume

回復 134# lovelykeroro

Probably assembled in Japan

lovelykeroro

剛剛身痕幫隻HHKB飛釘, 見到全部60隻軸housing(底面)連埋個上蓋都係用倒模注塑成型, 個模都一定唔少嘢, 成本隨時貴過用鋼板~




又試埋換87U送果幾粒淺藍色WASD上去HHKB嗰度, 不過感覺怪怪哋, 都係齋一粒紅色esc最好效果~

pang0011

真係要100% made in Swiss恐怕好難, 鐘錶入面D parts真係好多, 要一間或有限量的廠供應哂全部零件, 個成 ...
lovelykeroro 發表於 2010-10-25 22:41

我好辛苦終於搵到嗰段報紙, SCMP 4-Oct-10 "Clock ticking for 'Swiss made' component makers" by Neil Gough, 不過要log in 至睇到, 有SCMP account又有興趣既師兄可以search吓.  但我響網上面都搵到段差唔多既 Chinese ensure Swiss watches keep on ticking

新規定話如果叫得做Swiss made, 起碼要有"local content to account for between 60 to 80 percent of the watch's value, including the cost of components, research and design."

而原來我地香港都唔簡單"The mainland and Hong Kong were the biggest and fourth-biggest supplier markets, respectively, accounting for 27 per cent of Switzerland's total watch-related imports."

香港同大陸買勞同LV響世界都係數一數二, 而原來勞入面有部分零件都係由我地香港輸出

pang0011

回復  K_C_


    人窮志短. 哈哈哈哈~~ 真正有心無力
sv_sti 發表於 2010-10-25 17:32

要多謝你D漢語拼音keycap, 而家打普通話唔洗再望住張筆記來打啦

sv_sti

回復 138# pang0011


    多謝亞大CHING 比面就真, 話時話. 有幾多人想試下OR買隻RF 呢?? 我私人都想入隻RF103UB比自己用 ~HEHE

pang0011

回復  pang0011


     多謝亞大CHING 比面就真, 話時話. 有幾多人想試下OR買隻RF 呢?? 我私人都想入 ...
sv_sti 發表於 2010-10-26 00:33

對自己好D值得既, 又方便你招呼D師兄, 間舖都可能會旺D.
   

剛剛身痕幫隻HHKB飛釘, 見到全部60隻軸housing(底面)連埋個上蓋都係用倒模注塑成型, 個模都一定唔少嘢, 成 ...
lovelykeroro 發表於 2010-10-25 23:08

我覺得就算裏面D PCB同電子零件都好似Realforce靚過Filco

RF87UB



Filco