QNAP NAS problem

sttam

新手剛入QNAP TS219P+，雖己設定hd於十五分鐘內沒有存取便休眠及使用最新firmware，甚至拔除lan線後，均不能進入休眠狀態，hd燈依然亮著。請問如果解决？謝謝。

jwong2k04

果個係LED 熄左你反而要驚~~~
HDD LED status:
1) Flashes red - The disk data is being accessed and a read/write error occurs during the process
2) Red - A hard disk drive read/write error occurs
3) Flashes green - The disk data is being accessed
4) Green - The hard disk drive can be accessed
---------------------------
試 idle >15mins 後抄file 入 NAS
NAS 會頓十幾秒(spin-up 隻 HDD)先開始做野
耳仔近的話都聽到摩打開始打轉聲

sttam

下載 (24.16 KB)

2011-11-14 17:39

LED will be off
Anyway, thx for ur advice.

炎冬

LED will be off
Anyway, thx for ur advice.
sttam 發表於 2011-11-14 17:40

    我都試過...時得時唔得...不過之後都沒理佢..因為用左來PT..一定長閃..