小兒科DIY: 抽濕機換bearing

kentnklee

工人話部抽濕機唔work, 同有味,
趁今日國慶又整整佢.

已經拆過好多次, 熟手技工, 冇難度.


試下裸跑, 係行既不過好嘈, 發現係drive豬籠既摩打發出嚟


再拆開個摩打, 原來bearing 打柴, 邊度搵個bearing 換?
想話拆出嚟去配, 但老鼠拉龜, 唔知點拆,
惟有用超凡喜力去潤滑吓,

OK, 轉番順, 冇再seize up,
但因為已經行蝕左, 有好多虛位.


唔理咁多, 裝番佢用住先, 睇下有冇Ching指教下點拆同點換.


(原來部機既聲係來自個豬籠摩打, 我成日以為係compressor正常既運作聲, 如果上次有留意到, 就唔會行到蝕晒)

[ 本帖最後由 kentnklee 於 2009-10-1 12:39 編輯 ]

thesleeper

拆 bearing 工具

三四十蚊一個

片:
http://www.youtube.com/watch?v=QhBADmrMufs

[ 本帖最後由 thesleeper 於 2009-10-1 14:31 編輯 ]

冰之風

原帖由 thesleeper 於 2009-10-1 14:28 發表
拆 bearing 工具

三四十蚊一個

片:
http://www.youtube.com/watch?v=QhBADmrMufs

Oh! That is very nice.  However, kindly advise how to install back?

thesleeper

原帖由 冰之風 於 2009-10-1 14:37 發表

Oh! That is very nice.  However, kindly advise how to install back?

afte you have repaired / greased / replaced, simply hammer it back slowly and evenly to its axis;
of course, to prevent deformation and scratches when hammering, u have to put something in between

[ 本帖最後由 thesleeper 於 2009-10-1 14:44 編輯 ]

kentnklee

原帖由 thesleeper 於 2009-10-1 14:43 發表


afte you have repaired / greased / replaced, simply hammer it back slowly and evenly to its axis;
of course, to prevent deformation and scratches when hammering, u have to put something in between ...

邊度有呢D bearing賣? 北區有冇?

thesleeper

原帖由 kentnklee 於 2009-10-1 15:00 發表

邊度有呢D bearing賣? 北區有冇?

usually you have to order it from manufacture parts list, but i have also changed a bearing before, coz of emergency, from downstairs "五金店", it really fits and much cheaper

五金店 in the industrial areas have a bigger chance, like 大埔、火炭、粉嶺, 上水、屯門、元朗, etc

duncanlee

新填地街或甘霖街九龍啤呤,新界啤呤是一家人

thesleeper

原帖由 EOS 於 2009-10-1 15:17 發表


請問邊度有售 ?  

我以前做機佬果陣係工業村D五金鋪配返個 bearing 同 bearing puller